Discharge Hoses
Suction Hoses
Steel Cone Lined Suction Hoses
Armoured Suction Hoses
Floating Hoses
Pre-Shaped Hoses
Hose end Fittings
Steel Pipes
Flanges
Steel Pipe Bends
Y-Pipes
Gate Valves
Shore Valves
Pipe Floats
Ring Floats
Head Floats
Cargo (Off)loading Hose System
Hose Loading Stations
Fluid Transfer System
Tandem Mooring Systems
Marine Coupling System
Seawater Uptake System
Tanker Loading System
Chocks
Roller Chocks
Warping Rollers
Manhole Covers
Vent Caps
Water Tight Steel Doors
Fairleads
Bollard
WinchesGates Valves
Gates Valves
EMSTEC Gate valves are linear motion valves in which a flat closure element slides into the flow stream to provide shut-off. Gate valves are designed to minimize pressure drop across the valve in the fully opened position and stop the flow of fluid completely. The direction of fluid flow does not change, and the diameter through which the process fluid passes is essentially equal to that of the pipe. Hence, have minimal pressure drop when opened fully.
EMSTEC Gate valves are generally equipped with Stainless Steel gate plates and exchangeable wear resistant lining.
- Sizes range from DN 400 mm to DN 1200 mm.
- Pressure rating up to 25 bar.
The EMSTEC Gate Valves Seals are designed for dredging applications and for working pressures from 6 bar to 21 bar.
The standard EMSTEC Gate Valves Seals are available from DN 400 up to DN 1200 to meet customer requirements.